Sheet No.: Indupec-digital
Download datasheet here
Recommended power supply 24V
Rated operational voltage 12 – 36VDC
Ripple < 10%
Rated output current < 200mA
Supply current <10ma
voltage drop <2v at max load protection
protection reverse polarity
power up delay 70ms distance
max distance >4mm
Assured min dist. 0.5mm
Repeat accuracy <5%
Hysteresis 1 to 15%
EMC-protection: EN61000-6-2, EN61000-6-3, IACS E10, EN60945
PNP wirering diagram
DC wiring– normaly open
Do not connect pin 2 (Prog). It is reserved for programming.
Electrical connector 4 poles, IEC 947-5-2
BN + (1) Brown wire
Prog (2) Do not use!
BU – (3) Blue wire
BK Out (4) Black wire
Programming of threshold
There is a Programming tool available from Tempress A/S.
It is possible to program:
The detail instruction for programming is following the Programming tool.
If the threshold distance is too close to max distance you will get at warning. The warning is a flashing output signal.
The Indupec is preset to 3mm as standard. Other distance can be delivered by order.
Body and house Stainless steel (316)
Front AI2O2 (ceramic)
Treaded housing 3/8” BSP
Sealing Doughty ring or similar
Designed for pressure or Max. Allowable operating pressure:
(MAPO)static =500 bar (50 Mpa)
(MAPO)dyn. =400 bar (40 Mpa)
(Test Pressure) =600 bar (40 Mpa)
Standard version: 000176-004 available from stock
Operating -25 to +70°C
Storage -30 to +80°C
Low temperature version: 000176-005 only subjcet to manufacturing
Operating -40 to +70°C
Storage -40 to +80°C
Phone +45 8932 5200
Fax +45 8932 5213